Welcome to the Weissert Tool and Design website. If you are visually impaired we welcome you to contact us for questions or quotes at 360.836.7256 during normal business hours, Pacific Standard Time Monday through Friday. Thank you for your interest in our company.


Weissert Tool and Design
Weissert Tool and Design
Weissert Tool & Design
540 Washougal River Road
Washougal, Washington 98671

Voice  (360) 835-7256 - Fax (360) 835-8422

Molding Process
Click on the mold process phases below to see an example of how the molding process works.

» First Step:  The mold is in the closed position, while the material that will fill the mold is injected.
» Second Step:  After the material that the part is made with has filled the mold and has set for the correct amount of seconds, the mold is in the open position.
» Third Step:  The part is pushed out of the area in which it was formed. This is done by the "ejector pins" that slide through the mold as designed to enable the part to be removed without damage.
» Fourth Step
» Fifth Step



The sample images shown above are for mold illustration purposes only. Please note that during molding, the mold opens horizontally.
Website Privacy Statement  |  Link to Us  |  Webmaster  |  Text, Images & Design Copyright © 2004-2012 Weissert Tool and Design. All Rights Reserved.
No component of the weissert.com domain may be copied for distribution or publication in whole or in part without prior written consent of Weissert Tool and Design.